MAMBOBERRY LIGO photo mamaboberry_zpspqackwib.png

DISCONTINUED PRODUCT. LOOK AT MAMBOBERRY LS DAC+ ūüôā

 

CONVERT the  Raspberry Pi  in a truly Hi-Fi media player !

Special design ! РLow noise power supply & HD DXD 352.8Khz D.A.C. in one board !

 

We are guarantee the best sound quality in market for the RPi !

Design based at famous ‚ÄúMAMBO DAC‚ÄĚ series !

Mamboberry HiFi DAC+ with the ‚ÄúTime Domain Jitter Eliminator‚ÄĚ technology from SABRE

in addition with the low-jitter oscillator(Xpreso Fox), lower the jitter as much as possible.

‚ÄúVery low jitter is our goal and with ‚ÄėTime Domain Jitter Eliminator‚Äô by Sabre, we are now done with it‚ÄĚ

                                                     

The MAMBOBERRY HiFi DAC+ is a high-resolution digital-to-analog converter(DAC) for the Raspberry Pi models A+/B+ and 2B/Zero/Pi 3!.

Specially designed to deliver the best audio playback quality, and also an ultra low power supply ! with 1A power ability, for the Raspberry Pi models.

Mamboberry

  • Only one 6volt AC or 9volt DC external power supply needed for¬†both, Mamboberry HiFi DAC+ and the Raspberry Pi,¬†no need for USB power supply anymore
  • Dedicated high-quality SABRE DAC¬†for best sound quality(Sabre9023p dac chip)
  • Capable of Digital eXtreme Definition DXD 352.8Khz playback !
  • Connects directly to the Raspberry Pi,¬†no additional cables needed
  • No soldering. Comes as a pre-fabricated kit. You just plug it onto the Raspberry Pi A+/B+ and 2B/Zero, conform to the Raspberry Pi hardware-attached-on-top (HAT) specification.
  • Compatible with Raspberry Pi models A+/B+ & Pi2/Zero/Pi 3!
  • Dual Ultra-low-noise voltage regulator¬†for optimal audio performance
  • Available with ¬†output connectors: RCA¬†
  • Comes with all components required¬†to mount it. We include 4 M2.5x12mm spacers to fix the board onto the Raspberry Pi.
  • Bidirectional powered!¬†back-powered ability via io40pin port for the¬†Raspberry Pi from linear¬†power¬†supply of DAC, or the DAC powered from the¬†Raspberry Pi !¬†
  • Uses the¬†I2S ¬†signals for pure digital audio transfer to¬†improve the sound quality ! ¬†and reduce CPU load over USB audio solutions ¬†

Mamboberry HiFi DAC+

  • Nichcon¬†UQ audio series main filter caps¬†
  • Elna¬†rvo audio series local caps¬†
  • Tdk¬†xr7 ceramic caps¬†
  • Xpreso¬†Fox low jitter oscillator¬†
  • Susumu¬†low noise resistors¬†
  • Texas¬†instrument ultra low noise dual power supply
  • EVOX PFR in low pass filter !
  • Skotsky diode bridge rectifier

No more “noisy” switching ¬†power supply !!

Just connect a 6 Volt 2A AC transformer(or 9V 2A DC) and the on board ultra low noise regulator

 will supply the RPi  board with clean linear low noise power.

The result is an extremely high quality sound !

The board work also perfect as i2s DAC & ultra low noise power supply and can be easily connected with any USB TO I2S board! like amanero, xmos, cm6631a or any other board you like.